Carbon Steel Elbow Supplier In China
Elbow: In pipeline system, elbow is a pipe fitting that changes the direction of pipeline and is used to connect the bend of pipeline.
Carbon Steel Elbow: In pipeline system, elbow is a pipe fitting that changes the direction of pipeline and is used to connect the bend of pipeline.
Product information of Carbon Steel Elbow
|Produce name||45 Degree Elbow Supplier|
|TYPE||45°, 90°, 120°, 180°|
|Material||stainless steel, carbon steel, alloy steel|
|Surface||Clear, Bright, Brushing|
|Packing||Steel Pallet, Plywood, wooden Pallets|
|Origin||Made in China, Hebei|
|Species||More Than 300 Kinds For Choice|
Manufacturing process of Carbon Steel Elbow
Elbow is a kind of pipe fitting used for pipe turning. It has 90 degree elbow, 45 degree elbow and so on. It can be manufactured according to the needs of the project. The manufacturing process of elbow with different materials and different pressures is also different.
The forming process of seamless elbow commonly used in our factory includes hot pushing, stamping, extrusion, etc.
The hot push elbow forming process is a process in which a special elbow pushing machine, a core die and a heating device are used to make the blank sheathed on the die move forward under the push of the pushing machine and be heated, enlarged and bent during the movement. The deformation characteristic of the hot push elbow is to determine the diameter of the tube blank according to the law that the volume before and after the plastic deformation of the metal material is constant. The diameter of the tube blank used is smaller than the diameter of the elbow. The deformation process of the blank is controlled by the core die, so that the metal compressed at the inner arc flows and compensates to other parts thinned due to the expansion, so as to obtain the elbow with uniform wall thickness.
The tube blank equal to the outer diameter of the elbow is used for the stamping of the elbow, and the press is used to directly press the elbow in the die.
Stamping elbow is divided into cold stamping and hot stamping. Usually, cold stamping or hot stamping is selected according to material properties and equipment capacity. The forming process of cold extrusion elbow is to use a special elbow forming machine to put the tube blank into the outer die. After the upper and lower dies are closed, the tube blank moves along the gap between the inner die and the outer die under the push of the push rod to complete the forming process. The elbow made by cold extrusion of internal and external die is beautiful in appearance, uniform in wall thickness and small in size deviation, so this process is mostly used for the forming of stainless steel elbow, especially for thin-walled stainless steel elbow. The internal and external die used in this process requires high precision, and the deviation of the wall thickness of the tube blank is also relatively strict.
Middle plate welding is to make half of the elbow section with middle plate and press, and then weld the two sections together. This process is generally used for elbows above DN700.
We have a variety of Carbon Steel Elbows, click here to view.
45 Degree Elbow Show
45 Degree Elbow Product
Yarong Company Information
1. About Yarong
2. Our Factory
3. Our Certificate
4. Pay And Shipment
FAQ about Yarong
Over 10 Years of experience in pipe fittings and flange
What is your company's after service and warranty?
We make products according to drawings or standards, strictly until them reach your 100% satisfaction. We will be unconditional replace the poor products once get the confirmation of defected products.
How to place the order?
* You send us drawing or standards.
* The sample will be sent to you once it be finished.
* After the sample be confirmed, then you place an order and pay us 30% deposit
* We start to make the product
* We take photos for your check and you then pay the balance
* We arrange shipment
Is it possible to know how the product is going on without visiting your company?
We will offer a detailed products schedule and send weekly reports with digital pictures and videos which show the machining progress.
How long can I expect to get the sample?
Samples will be ready for delivery in 7-15 days for new mold products. The samples will be sent to you via express and arrive in 3-5 days. You can use your own express account or prepay us if you do not have an account.
What about the lead time for mass production?
It depends on the order quantity and processing technology. But we always try to meet customers' requirement by adjusting our workshop schedule. Generally, the lead time is about 15-35 days
How is terms of delivery?
We accept EXW,FOB,CIF,etc.most convenient one is selectable according to your demands.